AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateTrusted Furnace Repair for Gainesville Homeowners
When your heat stops working in the middle of a Gainesville cold snap, you don’t want a sales pitch. You want someone who can tell you what’s wrong and fix it. Our technicians have up to 15 years of experience diagnosing and repairing furnaces, and we work on the brands most homes in this city actually run, including Carrier, Trane, Lennox, and Goodman. That means no dead ends when you call. Fast dispatch from 7am to 7pm gets a technician to your door, and same-day service is often possible when you reach out early. We answer 24/7 at (844) 223-9427. Estimates are free.
Furnace Maintenance
Furnace Maintenance keeps a working system from turning into a mid-winter breakdown by catching worn parts and airflow problems before they shut you down. You need it most when your furnace has run a full heating season without attention, or when the heat feels weaker than it used to. In Gainesville’s mild winters, a furnace can sit idle for months and still develop issues, so an annual check before the first cold week pays off. At AC Repair Gainesville, we inspect the burners, heat exchanger, blower, and controls, then give you a written report of what we found. A tune-up typically runs $80 – $200, while any repairs that come out of it fall in the $150 – $700 range. The written estimate sets the final price, and there’s no charge for the estimate itself.
What a Maintenance Visit Covers
We check ignition, flame quality, the heat exchanger for cracks, blower operation, and the condition of the flue. Every finding goes into a written report so you know exactly what shape your system is in. If something needs fixing, you’ll see the price before any work starts.
How Often You Actually Need It
Once a year is the usual rhythm for most Gainesville homes, ideally before the heating season. A system that short-cycles or leaves a burning smell needs attention sooner. We’d rather look at it now than have you call us when it quits.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Heat Pump Repair
Heat Pump Repair fixes the system that handles both your heating and cooling when it stops switching modes, blows cold air in heating, or runs constantly without reaching the set temperature. You need it when your heat pump loses efficiency or stops responding to the thermostat, which is common after a long cooling season in Gainesville. Our technicians work on heat pumps from all the major brands, so we can diagnose the problem without guessing. That includes issues with the reversing valve, defrost cycle, compressor, and auxiliary heat strips. Typical heat pump repairs cost $150 – $700 depending on the part and labor involved. We offer a free estimate and a written quote before any work begins, so the final price is set per job by that estimate.
Heating Mode Failures
When a heat pump blows cool air in heating mode, the culprit is often the reversing valve, a defrost board, or a refrigerant charge issue. We test each component in sequence so we fix the actual cause, not a symptom. That saves you from repeat visits.
When Cooling and Heating Both Struggle
If your system can’t keep up in either mode, it usually points to a compressor, refrigerant leak, or control problem. We check the whole circuit, not just the side you called about. A quick diagnosis often uncovers something the last technician missed.
Heating Repair
Heating Repair covers the full range of fixes that get warmth back into your home, from ignition failures and thermostat faults to blower motor problems and duct restrictions. You need it when your system runs but doesn’t heat, cycles on and off, or makes noises it didn’t used to make. Gainesville winters are short but the cold snaps are real, and a furnace that quits during one leaves a house uncomfortable fast. Our technicians have up to 15 years of experience tracing heating problems to their source rather than swapping parts and hoping. Typical heating repairs run $150 – $700, and the written estimate sets the final price. Estimates are free. If the problem turns out to be the AC side, we handle that too, with AC Repair Gainesville available for the cooling months.
Systems That Run But Won’t Heat
A system that turns on but never warms the house usually has an ignition, gas valve, or control board issue. We test the sequence step by step to pinpoint where it fails. Once we find it, we’ll show you the part and explain the fix.
Strange Noises and Short Cycling
Rattling, banging, or a system that starts and stops every few minutes are signs worth checking right away. Short cycling wears out components faster and raises your energy bill. A technician can usually identify the cause in one visit with the right diagnostic tools.
Boiler Repair
Boiler Repair addresses the issues that keep a boiler from heating your home safely or efficiently, including pressure problems, pilot and ignition faults, leaks, and circulation failures. You need it when the radiators stay cold, the pressure gauge reads outside its normal range, or you hear knocking in the pipes. Boilers are less common in Gainesville homes than forced-air furnaces, but they’re out there, and not every HVAC company will service them. Ours will. We inspect the burner, the circulator, the expansion tank, and the controls, then give you a straight answer about repair or replacement. Typical boiler repairs cost $150 – $700 depending on the component. The written estimate sets the final price, and the estimate itself is free.
Pressure and Circulation Problems
Low pressure or weak circulation often traces back to a faulty expansion tank, a leaking valve, or air in the lines. We test pressure under load and check the circulator’s output. That tells us whether it’s a simple fix or a sign the boiler is near the end of its life.
Safety Checks on Gas-Fired Boilers
A gas boiler deserves a careful look at the burner, flue, and heat exchanger before anything else. Combustion problems are serious, so we test for proper venting and carbon monoxide risk. We won’t leave a boiler running that isn’t safe to run.
Gas Furnace Repair
Gas Furnace Repair handles the ignition, combustion, and gas valve problems that keep a gas furnace from lighting or heating properly. You need it the moment you smell gas, hear a boom on ignition, notice a yellow flame instead of blue, or your carbon monoxide detector goes off. Gas is not a wait-and-see situation. Shut off the valve if you suspect a leak and call a professional. Our technicians have up to 15 years of experience working with gas-fired equipment, and we test combustion and venting as part of every diagnosis. Typical gas furnace repairs run $150 – $700 depending on the part and labor. The written estimate sets the final price, and we offer a free estimate before any work begins.
Ignition and Flame Problems
Yellow flames, delayed ignition, or a furnace that won’t light are usually caused by a dirty burner, a failing igniter, or a gas valve issue. We inspect the whole ignition path and test flame quality. Fixing this correctly protects both your safety and the life of the furnace.
When It’s Not the Furnace At All
Sometimes the gas furnace is fine and the problem is the venting, the thermostat, or the flue. We check the whole system before recommending any repair. That keeps you from paying for a part that wasn’t broken.
Furnace Tune Up
Furnace Tune Up is a careful inspection and cleaning that keeps your furnace running efficiently and safely through the heating season. You need it once a year, ideally before the first cold stretch, and sooner if you’ve noticed weaker airflow, higher bills, or unusual noises. In Gainesville, where the furnace sits idle most of the year, a tune-up in fall catches dust buildup, worn belts, and obstructed burners before they turn into problems. Our technicians check the burners, the heat exchanger, the blower, the igniter, and the flue, then hand you a written report of what they actually found. Technicians aren’t paid on what they sell, so there’s no pressure to add anything. A tune-up typically costs $80 – $200. Repairs it uncovers run $150 – $700, and the written estimate sets the final price.
What You Get in the Report
Every tune-up ends with a written summary of findings, from heat exchanger condition to airflow measurements. You’ll know what’s solid and what to watch. If something needs fixing, you’ll see the price before anything starts.
Best Time to Book
The best time for a tune-up is before the heating season, while the system is still idle. Waiting until the first cold week means all the other homeowners in Gainesville are calling at the same moment. Getting ahead of it keeps your schedule flexible.
Emergency Furnace Repair
Emergency Furnace Repair covers the breakdowns that leave your home without heat and can’t wait until tomorrow, like a furnace that won’t ignite, a suspected gas smell, or a system that shuts down in the middle of a cold night. You need it when the house is getting cold, a safety concern is present, or your family needs heat back fast. We answer the phone 24/7, and fast dispatch from 7am to 7pm sends a technician out when you call during those hours. Same-day service is often possible. Typical emergency furnace repairs cost $150 – $700 depending on the issue and parts, and the price doesn’t depend on the time of day. The written estimate sets the final price, and the estimate itself is free. Call (844) 223-9427 to book.
What Counts as an Emergency
A furnace that’s completely dead, a gas smell, a carbon monoxide alarm, or a system that keeps tripping the breaker all count. So does a heat failure during a cold spell when someone in the house is elderly or ill. When in doubt, call; a quick conversation settles it.
What Happens When You Call
We ask a few questions about the symptom so the technician arrives with the right tools and parts. You’ll get a free estimate before any work starts. If the fix needs a part we don’t have on hand, we’ll tell you what to expect and when.
Brands We Service
We work on Carrier furnaces regularly, and we know where their ignition and control boards tend to fail as the equipment ages. Trane systems are solid but their fault codes can mislead a generalist, so we read them properly before replacing anything. Lennox units sometimes need specific attention to their heat exchanger and blower assembly, and we’ve handled that work many times. Goodman furnaces are common in value-minded installations across Gainesville, and their straightforward design means diagnosis is usually quick when you know the sequence.
We also service Rheem, York, Daikin, Bryant, and American Standard, covering both premium and value-tier equipment. That range matters when you’re deciding between repair and replacement, because we can recommend the right system for your home and your budget without steering you toward one manufacturer. Whether you have Carrier, Trane, Lennox, Goodman, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- No heat at all. If the furnace runs but the house stays cold, the ignition, gas valve, or control board may have failed. Don’t wait for it to fix itself; a small part now can save a bigger repair later.
- A gas smell. Any gas odor means shut off the valve and call a professional immediately. This is a genuine safety issue, not something to troubleshoot on your own.
- Yellow or flickering flame. A healthy gas flame burns blue. Yellow or flickering flames can signal incomplete combustion and carbon monoxide risk, so get it checked right away.
- Loud banging or rumbling on startup. A delayed ignition can cause a small boom when gas finally lights. It’s worth a check before it damages the heat exchanger.
- Carbon monoxide alarm going off. Get everyone out of the house and call for help. We take these calls seriously and dispatch a trained technician to find the source.
Our Process, Step by Step
- 1
Call and describe the problem. We ask a few questions to understand the symptom and set expectations for the visit. Call (844) 223-9427; we answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
- 2
On-site diagnosis. A technician tests the system with combustion analyzers, multimeters, and pressure gauges to locate the actual fault. You’ll see what we find, not just hear about it.
- 3
Free written estimate. Before any repair starts, you get a clear price for the work. There are no surprise charges, and the written estimate sets the final price.
- 4
Repair or replacement recommendation. If the fix makes financial sense, we repair. If the system is on its last legs, we tell you honestly and offer a furnace repair plan that fits, plus replacement options if that’s the better call.
- 5
Follow-up and verification. After the fix, we verify the system heats correctly and safely before we leave. If something isn’t right, we come back.
How Much Does Furnace Repair Cost in Gainesville?
Most furnace repairs in Gainesville run $150 – $700, with the final price depending on the part, the labor, and how deeply the system needs to be accessed. A furnace tune-up runs $80 – $200, and pairing it with a repair is the most cost-effective way to keep a system running.
A few common scenarios give you a feel for the range. A failing igniter or flame sensor on a gas furnace usually lands near the lower end of $150 – $700, while a blower motor or control board replacement sits toward the middle. A heat pump reversing valve or compressor-related fix tends to push toward the upper end. Boiler repairs follow a similar $150 – $700 range depending on the component.
What affects the price most: the cost of the part, how accessible it is inside the equipment, and whether the system needs refrigerant or combustion testing. Older systems sometimes need more than one component at once, which pushes the total higher but often makes more financial sense than multiple separate visits.
To avoid overpaying, ask for the written estimate before work starts, confirm the diagnosis is specific to your symptom, and get a clear recommendation on repair versus replacement. Our free estimate covers all three. There’s no charge to look, and the price you see is the price you pay.
Our Service Area Near Gainesville
We serve homeowners throughout Gainesville and the surrounding towns, including Alachua, Newberry, High Springs, Williston, Starke, Archer, Hawthorne, Keystone Heights, and East Bronson. Response times vary by location, but most nearby towns get same-day or next-day service. If you’re in Alachua or Newberry, we also serve those areas directly through our furnace repair and furnace repair pages. Call (844) 223-9427 to book.
Serving Gainesville, FL – Our Local Coverage Area
We serve Gainesville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Furnace Repair in Gainesville
Furnace repair is the work of diagnosing and fixing a heating system that isn’t running properly, from ignition and gas valve issues to blower and control problems. It covers gas furnaces, heat pumps, and boilers. Our technicians handle all three, so you’re not bounced between contractors. Typical repairs cost $150 – $700.
Most repairs take one to three hours once the technician has diagnosed the issue. Simple fixes like an igniter or flame sensor can be done quickly, while a blower or control board replacement takes longer. If a part needs ordering, we’ll tell you the timeline upfront.
Typical furnace repairs in Gainesville cost $150 – $700, depending on the part and labor. A tune-up runs $80 – $200. The written estimate sets the final price. Call (844) 223-9427 for a free estimate.
Yes, we service Carrier furnaces and equipment from Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. That means no dead ends when you call, even if your system is older or a brand another company won’t touch. Call to confirm your model.
Same-day service is often possible when you call early. Fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday. We answer the phone 24/7, and a call outside dispatch hours is booked into the next opening. Call (844) 223-9427.
Yes, our repair work is covered by a warranty on parts and labor. The specifics depend on the repair and the parts used, and you’ll get the details in your written estimate before work begins. Ask the technician when scheduling if you need the exact terms.
Clear the area around the furnace so the technician can access the equipment and controls. Note any symptoms you’ve noticed, like unusual noises or a yellow flame. Have your system model and any past service records handy, and make sure the thermostat is set to heat so we see the same behavior you do.
Schedule Your Furnace Repair Service in Gainesville Today
If your furnace isn’t heating, smells like gas, or is making noises you don’t trust, don’t wait for it to get worse. Call (844) 223-9427 for a free estimate and honest advice on whether a repair or replacement makes sense. We answer 24/7, and fast dispatch from 7am to 7pm gets a technician moving, Sunday through Friday. No pressure and no obligation, just a clear written price. Call us now and let’s get the heat back on.
Written by the team at AC Repair Gainesville.